Skip to Main Content »

Search Site
  • Currency: £

Fukuda EK-226P

 

Top tip: If you plan to work outside, long range or in bright conditions, you will always need to use a laser detector with your laser level.
This applies to all makes and models and for both red & green lasers.
This laser is not supplied with a detector as standard and so you will need to tick the 'Include Optional Detector' box to add it to your order.







Self Levelling Laser Cross / Line Level

Model: EK-226P

SKU: EK-226P

Was: £159.00

Sale Price: £124.00 Incl. VAT: £148.80
(Delivery may be extra depending on location)

Rating: 4.8 out of 5 stars

Availability: In Stock In Stock
Order by 3:30pm for Next Working Day Delivery (T&C Apply) *Order by 3:45pm for Next Working Day Delivery.

Calculating time left to place order...

Product overview:

The EK-226P is a Professional Laser cross & squaring instrument for the Internal Trades, with extra outdoor capability when matched to an optional detector.

It has all the features of the LP412 but with a number of refinements: namely, a better range both with and without the detector and double the operating time. It is well- engineered with a smooth action, metal rotate base and fine adjustment screw.

 

The horizontal & vertical lines of the Cross and the extra vertical line set at right angles, can ALL be switched ON/OFF either independently or used together.

 

There is no need to buy a second instrument to set floor & ceiling squaring at 90 degrees. The EK-226P covers these operations too. Simply place the laser level on the floor, switch on both vertical beams & it will lay down two red lines at accurate right angles. A "downred dot" gives the intersection point.  Ideal for floor tiling, setting-out of stud walls, partitioning and machinery alignment etc. 

 

No bubble levels are used as it aligns via an automatic, damped gravity system. 

 

A transit latch is included for safety which physically locks the mechanism & isolates the power too.
If the instrument detects any inaccuracy, it will automatically switch off the lasers - restoring them again when back in range. 
So no false levels can be given.
 


Beam diagram:


Features:

15m visible range, indoors
Provision of pulse mode to extend range with optional FD-9R Line Detector to 50m.
Projects 2 red vertical beams at 90 degrees to each other, to set floor squaring.
1x horizontal line and 1x down dot, to set plumb
Magnetically damped pendulum, auto (self) levels
Pendulum mechanism latch for safe transportation
Out-of-level indication
5/8" threaded Rotate base with fine adjustment screw
Operates on 3 x AA batteries
Full 12 months parts & labour Warranty.


Specification:

Accuracy: +/-2mm @ 10 metres
Self levelling range: ±3°
(Instrument will auto level on surfaces up to 3 degrees out of true level)
Working range: 15m / 50m with Detector
Laser class: 2M lines (down dot class 2)
Wave length: 635nm
Power supply: 4.5.dc (3 x AA size batteries)
Operating time: 15 hours continuous
IP rating: IP33
Operating temperature: 0 to 50 deg C
Mounting thread: 5/8" x 11, ISO standard
Instrument size: 115 x 120 x 180H(mm), including base
Weight: 1.4kg with batteries.


Calibration and servicing:

We check and calibrate all Lasers prior to dispatch, to ensure they meet or exceed the manufacturers published specifications at the time of shipment from the factory.
If you routinely work on large job sites, which require you to have a physical Calibration certificate, issued in your name and matched to the Laser via its serial number, you must ensure you tick the above box marked "Paper Certificate" (where applicable) to add a Calibration certificate to your order. The Certificate will then be generated and included with your Laser. Please note the issuing of a Calibration certificate DOES NOT delay or hold up the despatch of your Laser in any way.

Kit comprises of:

EK-226P instrument
3 x type AA alkaline batteries

5/8"-5/8" Adapter

FD-9R Detector & clamp bracket (Optional Extra)

Red angled laser target
Red Laser Glasses
Instruction & safety manuals
All in a protective, foam lined Carry Case.

Key information:

Model EK-226P
Brand Fukuda
Type Cross Line Laser WITHOUT Detector as standard
Laser beam Dot & Line
Laser colour Red Beam
Beam axis Horizontal & Vertical
Levelling Fully Self Levelling
Usage Indoor & Outdoor
Facilities Plumb
Setting out Squaring / 90° Setting Out
Mounting thread 5/8 inch
Power source Alkaline (Non-Rechargeable)
Laser output Class 2
IP rating IP33 (Protected from water spray less than 60 degrees from vertical)
Warranty Full 12 Months Parts & Labour Warranty

Frequently bought together:

Customers who bought this product also commonly purchased the following combination of items.

This Item: Fukuda EK-226P

Orient KS-3
£59.95 Incl. VAT: £71.94

Fukuda FD-9R Line Detector

Was: £89.00

Sale Price: £54.00 Incl. VAT: £64.80

Price for all: £237.95 Excl. VAT.

You may also be interested in the following similar products:

Fukuda EK-268GD

Fukuda EK-268GD

Was: £288.00

Sale Price: £253.00 Incl. VAT: £303.60

Orient LP412

Orient LP412

Was: £125.83

Sale Price: £90.83 Incl. VAT: £109.00

 

Questions and answers about this product:

Please click the relevant question to display the answer. Or you can ask your own question by clicking the "Ask a Question" button.

Posted by philip botting on Tuesday 1st of November 2016

Question:

Hi i have a gp-8155 laser level for many years and it has stopped working, the laser lines do not operate and the detector also does not respond, is it possible to have this model repaired and at what cost ? Regards philip

Answers:

  • Posted by Laser Levels Online - Support on Tuesday 1st of November 2016

    Hi Philip,

    Sadly the GP-8155 was discontinued many years ago. It has since been superseded by the LP330 and after that was discontinued it was further replaced by the LP412.

    We do not hold spares for your laser and if we did the cost or repair would likely exceed the cost of a new laser.

    Best regards
     
    Mark Roberts
    Laser Levels Online

     

Posted by Sam on Wednesday 12th of August 2015

Question:

Hi, What's the lead time on the Fukuda EK-226P, can it ship to the UK to arrive before Friday? Sam

Answers:

  • Posted by Laser Levels Online - Support on Wednesday 12th of August 2015

    Hi Sam,
     
    Thank you for your email.
     
    The Fukuda EK-226P like 99% of our products is an off-the-shelf stock item in Chesterfield, Derbyshire.
     
    Orders placed online by 3:00PM each working day will see delivery the following working day.
     
    However, deliveries to some addresses, particularly those in the Scottish Highlands and Islands as well as some offshore locations including Northern Ireland are subject to extended delivery times and costs.
     
    If you have any further questions or require any additional assistance please do not hesitate to contact us.
     
    Best regards
     
    Mark Roberts
    Laser Levels Online

Posted by John Turner on Monday 3rd of November 2014

Question:

Hi, I'm looking to buy my first laser level and need some advice please. It will be used to assist my regular joinery work, fitting kitchens, bathrooms, wall and floor tiling, stud walls etc. and general setting out. My budget is £200, but for that, I'd need a fairly tough one to hopefully serve me well for a few years. I'd appreciate your help, cheers, John.

Answers:

  • Posted by Laser Levels Online - Support on Monday 3rd of November 2014

    Hi John,

    Sadly the budget you have mentioned doesn't quite match your list of requirements and I am unclear if that is with or without VAT.

    However, the DeWalt DW089K would be ideal:

    http://www.laser-level.co.uk/products/laser-cross-line/dewalt-dw089k-3-beam-laser-cross-line-level.html

    but may or may not  be over budget.

    Alternatively you could drop down to something like EK-226P which is may be more in line with your budget:

    http://www.laser-level.co.uk/products/laser-cross-line/ek-226p-laser-cross-line-level.html

    I hope this helps.

    If you have any further questions or require any additional assistance please do not hesitate to contact us.
     
    Best regards
     
    Mark Roberts
    Laser Levels Online


Posted by P Emmerson on Monday 6th of October 2014

Question:

Hi, Can you please tell me what the fan angle is for the EK-226p? i need a level for internal use (replacement floor screed) so was looking for a rotating model but i also need one for occasional external surveying (with detector and staff). I'm assuming that a rotating base would enable me to turn the unit accurately but cannot find the fan angle to see how often this may be needed. Thanks.

Answers:

  • Posted by Laser Levels Online - Support on Monday 6th of October 2014

    Hi,

    The fan angle of the horizontal red beam is approx. 120 degrees on the EK-226P. It does have a pulsed output for use with an optional FD-9R detector. See "tick box" in the site listing.

    http://www.laser-level.co.uk/products/laser-cross-line/ek-226p-laser-cross-line-level.html

    The rotate base can be easily turned by hand (very smootly engineered) & there is a fine adjusting cross-spindle - if required. A very well designed system.

    Remember, if the laser is positioned right into the corner of a room, then just a single move is often adequate to cover the majority of the room's area.

Posted by Andras Bognar on Wednesday 25th of June 2014

Question:

Can the plumb dot be used when mounted on a tripod?

Answers:

  • Posted by Laser Levels Online - Support on Wednesday 25th of June 2014

    Hi,

    The EK-226P has a 5/8 inch thread.

    All surveying tripods we sell have a hollow 5/8 inch thread which will allow the beam to pass through.

    So, Yes, the plumb dot can be seen if it is mounted on a tripod with a hollow thread.

    If you have any further questions or require any additional assistance please do not hesitate to contact us.
     
    Best regards
     
    Mark Roberts
    Laser Levels Online

Posted by Nick James on Friday 20th of December 2013

Question:

Fukuda EK-226P Has it got a lock function so I can project slopes such as stairs Can it be used for floor tiling

Answers:

Common Questions: Can you ship to my country?
Answer: Yes, we deliver worldwide.
Common Questions: I have a valid EU VAT number, is it possible to buy with 0% VAT.
Answer: Yes, enter your EU Vat number at the checkout and after it is automatically checked with the EU VAT database it will make the order 0% VAT.
Common Questions: Is the product in stock?
Answer: Yes, if it says 'In Stock' then it's in Stock.

Ask Your Question

* Required Fields

This product has been recommended as being suitable for the following trades or applications:

Use spaces to separate recommendations. Use single quotes (') for phrases.