Skip to Main Content »

Search Site
  • Currency: £

Stabila LAX 400 Kit

 

Top tip: If you plan to work outside, long range or in bright conditions, you will always need to use a laser detector with your laser level.
This applies to all makes and models and for both red & green lasers.
This laser is not supplied with a detector as standard and so you will need to tick the 'Include Optional Detector' box to add it to your order.







Stabila Fully Self Levelling 360° Cross Line With 90° Squaring & Plumb Point Laser

Model: LAX 400

SKU: LAX 400

Was: £311.67

Sale Price: £289.99 Incl. VAT: £347.99
(Delivery may be extra depending on location)

Rating: 4.5 out of 5 stars

Availability: In Stock In Stock
Order by 3:30pm for Next Working Day Delivery (T&C Apply) *Order by 3:45pm for Next Working Day Delivery.

Calculating time left to place order...

Product overview:

Accuracy and reliability go hand-in-hand with the Stabila Brand to achieve a successful outcome for any job. The all NEW Stabila cross line model LAX 400 is here to help you do this.

 

Whether you are a drywall builder, tiler, electrician, plumber or carpenter; this multi-line laser can handle an extremely wide range of measuring tasks and helps you work more accurately and more productively — allowing you to get more done in less time. 

 

The wide range of functions that the Stabile LAX 400 has to offer includes a full 360° horizontal line, a 90° angle for precise layout work and a plumb line both upwards and downwards. These thin, clearly visible red lines have a measuring distance of up to 20 metres. Extend this range to 40m with an optional detector.

 

The Stabile LAX 400 enables just one person to carry out a whole host of tasks quickly and, most importantly, without costly measurement errors, meaning that an investment in this premium Stabila kit pays off in no time at all!


Beam diagram:


Product video:

Please note: The Stabila promotional video may demonstrate the Stabila LAX 400 instrument in conjunction with optional accessories that are not included as standard. Please check the "Kit comprises of" section to ensure the accessories you require are included.


Features:

  • Pendulum Self Levelling
  • One 360 degree horizontal line, two vertical lines set @ 90 deg & plumb-lines pointing upwards to match with a plumb down dot.
  • Extendable case "foot" with latch clamp.
  • The vertical lines spans the floor, walls and ceiling, from just below the laser, across the room to just above the laser. At the same time the plumb-line dots mark the starting point of the line.
  • In the same way the horizontal beam spans all walls to give full around 360 degree coverage..
  • Mark floor, walls and ceilings at the same time.
  • Very bright, narrow and clear laser lines.
  • Pulsed Line facility makes it compatible with a Stabila REC 220 Detector, part no. STB-18643. This detector is available as an optional accessory, allowing external use and offering the User a range of up to 40m for the horizontal beam in a straight line. 40m for the vertical beam too. A very useful feature extending the Stabila LAX 400's use to the outdoors.
  • Casing has a v-groove rare earth magnet for mounting on metal objects or on the metal wall bracket provided.
  • Park position: Rotating the laser so that the face is fully hidden provides optimal protection of the optical equipment against dust and scratches.
  • IP54 Dust and Water Protection rating.

Specification:

  • Laser class 2, 1mW, 635nM,
  • Red beam visibility 20m extendable to a max. of 40m with REC 220 optional detector
  • Self Levelling Range approx +/- 4.0°.
  • Measuring distance: 20m
  • Protection: IP54
  • 10 hour operation period from 4 x AA alkaline batteries
  • Levelling Accuracy: +/-3mm @ 10 metres 
  • Line straightness: ±2mm @ 10m
  • 90° angle precision:+/-3mm @ 10m

Detector features:

Stabila model number REC 220 is available as an optional line detector. A clamp bracket & battery are included in the kit.

This gives the Stabila LAX 400 laser's horizontal beam, a straight line range of up to 40m for both outdoor & indoor usage.

 

Main features:

Front display

Rear top magnet

Water jet and dustproof to an impressive IP67.

50 hrs operating battery life

Three sounder level settings.

 

 Please note that the detector only works with the laser lines (laser cross) & not the Up/Down Plumb pointers.

 

The REC 220 detector & bracket can be stored in the LAX 400 carry case.

 

 


Example usage:

The Stabila LAX 400 can be used by all the Professional Internal Trades for:
Stud wall & partitioning / Suspended Ceiling installation / Door & window fitting,

Wall Tiling / Shop fitting & refurbishment work / General Machinery installation,

Electrical conduit & lighting  / Plumbing & pipework / Kitchen & bedroom unit installations

& many others.

With the optional DETECTOR:

The range is extended to 40m for usage outdoors for general building applications.


Calibration and servicing:

We check and calibrate all Lasers prior to dispatch, to ensure they meet or exceed the manufacturers published specifications at the time of shipment from the factory.
If you routinely work on large job sites, which require you to have a physical Calibration certificate, issued in your name and matched to the Laser via its serial number, you must ensure you tick the above box marked "Paper Certificate" (where applicable) to add a Calibration certificate to your order. The Certificate will then be generated and included with your Laser. Please note the issuing of a Calibration certificate DOES NOT delay or hold up the despatch of your Laser in any way.

Kit comprises of:

Stabila LAX 400 Laser Instrument

4 x AA alkaline batteries
Magnetic wall mount (integral)

Extra metal wall plate

Red magnetic target plate

Red laser enhancement glasses

Heavy duty, plastic carrying case

Quick-start & Full Instruction / Safety Manual CD

Key information:

Model LAX 400
Brand Stabila
Type Cross Line Laser WITHOUT Detector as standard
Laser beam Line
Laser colour Red Beam
Beam axis Horizontal & Vertical
Levelling Fully Self Levelling
Usage Indoor & Outdoor (Although mainly an Indoor product)
Facilities Plumb
Mounting thread 5/8 inch
Power source Alkaline (Non-Rechargeable)
Laser output Class 2
IP rating IP54 (Protected against dust / Protected against splashing water from any direction)
Warranty Full 24 Months Parts & Labour Warranty

Frequently bought together:

Customers who bought this product also commonly purchased the following combination of items.

This Item: Stabila LAX 400 Kit

LAT Tripod
£55.00 Incl. VAT: £66.00

Stabila Telescopic Support LT-30

Was: £71.00

Sale Price: £54.17 Incl. VAT: £65.00

Stabila REC220 Line Detector
£169.00 Incl. VAT: £202.80

Price for all: £568.16 Excl. VAT.

You may also be interested in the following similar products:

Fukuda FLG-411QGD

Fukuda FLG-411QGD

£379.00 Incl. VAT: £454.80
Stanley FatMax SML MultiLine

Stanley FatMax SML MultiLine

Was: £342.95

Sale Price: £317.92 Incl. VAT: £381.50

 

Questions and answers about this product:

Please click the relevant question to display the answer. Or you can ask your own question by clicking the "Ask a Question" button.

Posted by Samuel on Thursday 8th of December 2016

Question:

Hi ! I bought the Stabilas LAR 250 earlier whit REC300 detector . Can I use the detector whit LAX 400 ? Sincerely Samuel

Answers:

  • Posted by Laser Levels Online - Support on Thursday 8th of December 2016
    Hi Samuel,
     
    Thank you for your message.
     
    There are two distinct types of laser levels - Rotary and Cross Line and each have their own type of laser detector.
     
    Rotary laser detectors work by the laser dot skimming across the face of the detector at around 600rpm. This means that as long as you stick to red lasers and red detectors or green and green you can mix and match any make and model of rotary laser level with and detector. e.g Stabila Rotary and a Spectra Detector.
     
    Cross line lasers require a pulsed output mode which depending on the frequency of the pulse can only be picked up by a propitiatory cross line detector. As such you can only reliably use the exact cross line detector specified for your specific cross line laser. As such you will need to buy a Stabila "Cross Line Detector". It will not work with any Rotarty detector.
     
    I have a showroom here full of cross line lasers and cross line detectors form various brands. A Dewalt detector wont work with a Stanley laser, a Stabila detector wont work with a Fukuda etc... etc...
     
    Sometimes another brands detector may be very close in frequency to the laser you have and may initially appear to pick-up the beam but you tend to find if the "real" detector is designed to work over a range of 50m, that the other brand will work up to a couple of meters and then stop picking up.
     
    I hope this helps.
     
    If you have any further questions or require any additional assistance please do not hesitate to contact us.
     
    Best regards
     
    Mark Roberts
    Laser Levels Online
    The Laser Level Specialists
Posted by Ian on Tuesday 23rd of August 2016

Question:

Does the Lax 400 cross level have a pendulum lock for safety in transit

Answers:

  • Posted by Laser Levels Online - Support on Tuesday 23rd of August 2016

    Hi Ian,

    Yes, both the LAX300 and LAX400 both have a transit latch which locks the pendulum to one side when in transit.

    I hope this helps.

    If you have any further questions or require any additional assistance please do not hesitate to contact us.
     
    Best regards
     
    Mark Roberts
    Laser Levels Online
     

Ask Your Question

* Required Fields

This product has been recommended as being suitable for the following trades or applications:

Use spaces to separate recommendations. Use single quotes (') for phrases.