Automatic Rotary Laser Level Kit, inc. Detector & Remote control

A popular laser level kit imported from an Laser Optics Company in Taiwan. They are specialists in their field of laser level manufacture & certified to ISO-9001. The FRE-211 is well featured & very competitively priced.

Please note: Instrument body Colour may vary depending on stock availablity.

For Indoor & Outdoor use with a 635nm visible red laser output
Sealed water-proof construction
Self-levelling both horizontally & vertically
Up & down dot for setting Plumb
Accurate 3 axis electronic sensor
IR control via handheld Remote
Anti-Drift system (Bump sensor)
Dual Grade & SCAN facility
Auto shut-off - if instrument goes outside of its levelling range
Low battery indication
Rechargeable battery system
Full 12 months parts & labour Warranty

You have the facility to totally stop or move the red dot slowly in either direction using the remote control. Rotational speed is adjustable in 5 increments up to max. of 600 rpm.
For Indoor use, the SCAN facility comes into its own. This enables the User to stop the dot, then make it oscillate as a short intense red line in one area of the room only. Left/right keys on the remote control moves this laser line to the exact area of working. A really useful feature.

You can keep XX axis auto level, whilst setting a Grade (tilt angle) on the YY axis. This is very useful for setting falls of drainage, car-parks & access ways. Or you can set grades in both axis together (DUAL Grade facility).

Additionally a perfectly plumb laser dot is generated both above & below the instrument. With the instrument set on its side to spin vertically, these dots can be used to set right angles.

Horizontal accuracy: +/- 2.9mm over 30m
Vertical accuracy: +/- 2.9mm over 30m
Auto (self) levelling range: +/-5 degree
Measuring range: 500 metres diameter (using the supplied laser detector)
Rotation speed: 0 to 600rpm (adjustable)
Dual Grade range: +/-5 degree (in both X & Y axis)
Laser Output: 635nm visible red laser diode
Laser ground plumbing: Accuracy +/-1mm / 1.5m
Remote Control range: 20 metres by IR
Power supply: 4 x 1.5 Volt rechargeable batteries (included)
Continuous operating: 20hrs approx.
Working Temperature: -20 to +40 deg C
Waterproof protection: IP54
Instrument Dimensions: 161(L) x 161(W) x 184H (mm)
Instrument weight: 2.2kg (with batteries)

Robust & foam lined, aluminium carry case: 370 x 230 x 250(H) mm
Kit gross weight: 4.6kg

A compact Laser Detector (receiver) to extend the range of the FRE-211 to 500 metres diameter.

Features:
Large detecting range compatible with visible red output lasers
from 635 nm to 780 nm.
High accuracy.
Audible and visual indication of set LEVEL.
Staff mounting clamp bracket

Specification:
Detecting accuracy: fine & course settings +/- 1mm & +/- 2mm
Display: Front & back LCD
Audible pitch warning. (selectable On/Off)
Power supply: 1 x 9V battery
Operating time: Approx 30 hours continuous, at 20 deg C.
Low battery warning via LCD
Power Conservation: 10 minutes auto cut-off.
Dimensions: 75 x 27 x 152mm
Weight: 285g (with battery & bracket)

Calibrated FRE-211 Laser instrument (colour may differ from that pictured)
Laser Detector with mounting clamp bracket
IR Remote Control
Rechargeable battery pack for laser
Mains charger unit

Batteries for Detector & Remote Control
Red laser enhancement glasses
Red magnetic target plate
Instruction & Safety manual
Robust & foam lined, aluminium carry case