A very popular, Manual setting laser level kit.
Accurate, reliable & very competitively priced.
Projects a 360 degree, visible red laser chalkline for precise levelling in both the horizontal or vertical planes.
Easy, smooth adjustment of high visibility bubble levels.
Fine pitch, manual levelling screws - colour coded for ease of use.
Rigid alloy levelling base with 5/8" tripod mounting. (Tripods, Wall brackets & floor to ceiling Pillars are available as optional extras)
Three operational modes: spot, scan and rotate.
Rotating speed variable from a static dot, 100 to 300 rpm.
SCAN feature with 2 line widths & 360 degree positioning via Remote control.
Dual beams for 90° squaring layout.
A Laser Detector is included to increase laser levels usable range.
IR remote control.
Laser diode: 635nM, class II, <1mW, visible red beam
Horizontal accuracy: +/-6mm @ 30 metres
Vertical accuracy: +/-9mm @ 30 metres
Working Radius: 120m with detector, 30m without detector.
Suitable for both indoor & outdoor use (Rain & dust-proof)
Rotating speed: Dot & variable 100 to 300 rpm.
Power supply: 4 x AA type alkaline batteries (included).
Operating time: approx. 10-12 hours continuous operation.
Controls: ON / OFF / Rotate / Scan.
Dimensions: 12 x 17 x 18 high (cm)
Net Weight: 1 kg (with batteries)
Laser Detector Model LS700
A well featured, Laser Detector extending the range of the LS5000 to 120 metres.
Large detecting range compatible with single and dual beam rotating,
visible red output lasers from 635 nM to 780 nM.
Audible and visual indication of set LEVEL. Front & rear LCD's
Mounting bracket included, for measuring staffs etc
Detecting accuracy: selectable, fine +/- 1mm & course +/- 2mm
Display - LCD and audible 3 tone pitch warning.
Power supply - 1 x 9V battery.
Operating time - Approx 30 hours continous, at 20 deg C.
Sounder - On / Off
Low battery warning - via LCD.
Power Conservation - 5 minutes auto cut-off.
Dimensions: 65 x 24 x 168mm
Weight: 200g (with battery)
Calibration and servicing:
If you routinely work on large job sites, which require you to have a physical Calibration certificate, issued in your name and matched to the Laser via its serial number, you must ensure you tick the above box marked "Paper Certificate" (where applicable) to add a Calibration certificate to your order. The Certificate will then be generated and included with your Laser. Please note the issuing of a Calibration certificate DOES NOT delay or hold up the despatch of your Laser in any way.
Kit comprises of:
LS5000 Rotary laser level & set of batteries
LS700 Laser Detector & 9V battery
Mounting bracket for detector
Remote control & 9V battery
Lay-down plate & adjusting pin
Magnetic target plate
Foam-lined carry case 39 x 29 x 15cm
Gross wt: 3.3 kg
Don't forget to add a Tripod and Staff to your order.
For our full range of Tripods / Staffs and Rods please Click Here.
Alternatively you can add the "frequently bought together" package to the basket.
|Beam axis||Horizontal & Vertical|
|Usage||Indoor & Outdoor (Although mainly an Indoor product)|
|Setting out||Squaring / 90° Setting Out|
|Mounting thread||5/8 inch|
|Laser output||Class 2|
|IP rating||IP43 (Protected from water spray less than 60 degrees from vertical)|
|Warranty||Full 12 Months Parts & Labour Warranty|
Frequently bought together:
Customers who bought this product also commonly purchased the following combination of items.
You may also be interested in the following similar products:
Sale Price: £219.00 Incl. VAT: £262.80
Sale Price: £325.00 Incl. VAT: £390.00
Sale Price: £259.00 Incl. VAT: £310.80
Questions and answers about this product:
Please click the relevant question to display the answer. Or you can ask your own question by clicking the "Ask a Question" button.
can i visit your premises to view/decide which laser best suits our needs?
Posted byon Thursday 27th of November 2014
Yes, please see:
If you have any further questions or require any additional assistance please do not hesitate to contact us.
Laser Levels Online
I want to get whole package for Pakistan .can u show me how it work.i have laser here just need machines to put on laser and tractor.and Rays machines please tanx I ll wait .
Posted byon Wednesday 30th of October 2013
You will need:
1 x Fukuda FRE-205:
1 x LAT Tripod:
1 x 5M Measuring Staff:
To calculate the cost and delivery simply add them to the basket and then proceed to the checkout.
If you also require a Machine Control Detector (For use with a Tractor), please also see this section:
There are a range of detectors available depending on your budget.
I hope this helps.If you have any further questions or require any additional assistance please do not hesitate to contact us.Best regardsMark Roberts
Laser Levels Online