Stanley Fatmax Auto Rotary Laser, model RL HW+

New to the family of Stanley Fatmax Lasers is the Auto Rotary Laser level, model RL HW+
Its a durable & very accurate laser level, rated at +/-1.5mm @ 30m

The fully automatic, self-leveling Stanley RL HW+ is capable of handling a wide variety of general construction applications. Even in the toughest job site conditions, the RL HW+ consistently delivers reliable, accurate performance to increase your overall productivity and cost-savings.

The laser can be mounted on a tripod to send a 360° plane of laser light over the entire work area, allowing one person to take accurate, self-leveled elevation measurements up to 300 metres away when using the supplied RLD400 laser detector.

The Fatmax RL HW+ is designed to be durable and reliable, day in and day out, and features superior weather protection to IP66.

This instrument is capable of handling a wide variety of elevation control applications.
Versatility is added with dual-axis manual slope capability, for setting out driveways, ramps, and drainage lines etc

Auto levels (self-levels) horizontally for all Groundworks applications.

Also self-levels in the vertical plane to set Plumb.

Automatic electronic self-leveling - turn it on and start working.

Simple one-button operation for quick start up.
Height of Instrument Alert (Bump sensor) - unit stops rotating when jarred to avoid erroneous readings.
Dual axis manual slope mode to match known references.
Slopes can be set up to 20 m away with the supplied RC100 remote control.
Energy-efficient design offers long battery life of up to 24 hours between charges.

Laser Source: 635 nm visible, Class 2
Horizontal Laser Accuracy: ±1.5mm at 30 m

Vertical Laser accuracy: ±3mm at 30 m

Operating Range (Diameter) with RLD400 detector: 600m
Compensation Method: Electronic self-leveling

Leveling time: approx 20 secs

Self-levelling range: +/- 5 degrees (Instrument will self level on surfaces up to 5 deg out of true level)

Dual Axis Manual Slope Mode: Yes, slope setting up to +/-6 degrees (10%)
Out of Level (HI) Warning: Yes
Power Source: 4 x type C special rechargeable battery pack, Ni-MH type.
Battery Life: 24hrs continuous
Fixed Rotation Speed: 600 RPM
Tripod Mount (Horizontal and Vertical): 5/8” x 11
Operating Temperature:  -10 to +50°C

Storage Temperature:  -20 to +70°C

Water Resistant:  Yes to IP66 protection
Size: 21 x 17 x 12 cm
Weight: 1.75 kg with batteries
Warranty: Full 12 months Parts & Labour

Dual LCD’s on front and rear are ideal for general exterior applications
Fine or standard accuracy fits all application needs.
Two On-Grade Sensitivities: Fine 1 mm & Coarse 2 mm.

Laser pick-up window 55mm

Speaker has high/low & mute settings
Automatic shut-off facility after 10 mins

Bubble level 30'/2mm

Operating time, 20hrs continuous

IP66 protection (resists up to powerful water jets)

Operating temp. range:  -10 to + 50 deg C

Storage temp. range:  -20 to +70 deg C

Weight: 285g with bracket & batteries
Warranty: 12 months

Included in the kit is a Fatmax infra-red Remote Control, type RC100

Enables User to set X & Y axis slopes together or independently.

Will also switch OFF the laser.

Weight with 2 x AA batteries fitted is 145g

General Groundworks for Residential & small scale, commercial applications
Footings, foundations & slab-laying
General construction leveling and aligning
Outdoor elevation transfer work such as septic tank installation.
Slope capability for setting out driveways, ramps, and drainage lines etc

Fatmax RL HW+ laser instrument
Rechargeable battery pack

Mains charger (UK & Euro)
RLD400 detector & 2 x AAA batteries
Mounting clamp bracket

RC100 remote control & 2 x AAA batteries

Red magnetic target plate

Instruction & safety manual
12 Months Warranty