Orient LP618 (Red Beam) Multi-line Laser LevelSelf Levelling Multi-Line Laser with Detector & Remote Control
The Multi-Line LP618 is a true professional, well-featured Cross Line Laser suitable for both Indoor & Outdoor use.
To enable it to operate Outdoors, even in bright sun, it uses a special pulsed output setting and supplied laser detector.
This is an accurate, self-levelling instrument which generates bright, visible red (thin) lines. There is one horizontal line, 4 vertical lines set at right angles to each other and a down dot to check plumb.
The horizontal & vertical lines can be switched ON/Off either independently or all used together. No bubble levels are required, as it aligns via an automatic, damped gravity system. A transit latch protects the levelling mechanism when moving from job to job.
The instrument has an integral rotate base with fine screw adjustment and can be used "stand-alone" or mounted on a 5/8" tripod. The User can switch the laser beams ON or OFF remotely using the supplied Remote control and also change between use, with or without the Laser Detector. The Detector is essential for outdoor use, but it can also be used indoors in bright conditions or where a long-range is required.
Up to 40m range with supplied LR-60 Line detector. (Visual 10-15m without the detector).
The LP618 has an accurate, magnetic damping system for quick self-levelling.
If the instrument exceeds the self-levelling range, the laser lines will flash at one second intervals to warn the User that its out-of-level.
The Laser has one horizontal & 4 vertical lines with a plumb down dot, where the 4 vertical lines cross on the ceiling above at 90°.
With a smooth horizontal rotating mechanism and fine adjustment knob for convenience, this enables you to set vertical line positions with ease.
The RL600 remote control can be used to control all functions on the instrument.
Full 12 months parts & labour Warranty
Accuracy: +/-2mm @ 10 metres
Self levelling range: ±3° (Instrument will auto level on surfaces up to 3 degrees out of true level)
Working range: minimum 10m (visible) or 40m with detector
Laser class: 2M
Wave length: 635nm
Working distance of remote control: 25m
Power supply: 6V dc (4 x AA alkaline size batteries)
Operating time: 8 hours continuous
Range of operating temperature: -10°C - +50°C
Mounting thread: 5/8" x 11, ISO standard
Instrument size: 110 x 130 x 190(mm)
Most Professional trades ie. Tilers, Electricians, Plumbers, Joiners etc.
For: Wall & floor tiling / electrical conduit & lighting / piping installations / kitchen & bedroom unit installations / refurbishment work / stud wall & partitioning & many others.
Also Included In The Kit
The Orient LP618 kit also includes the RL600 Remote Control:
Remote control type: Infrared
Control distance: up to 25m
Function: Controls all the lines and switches between indoor/outdoor pulsed mode.
Power supply: 3V.dc (2 x AA size batteries)
|Product Type||Multi-Line Laser|
|Levelling Type||Fully Self Levelling|
|Indoor Range (Naked eye)||Up to 10m (Depending on Ambient Lighting)|
|Range with Detector||Up to 40m|
|Laser Level Accuracy||±2mm at 10m|
|Laser Beam Colour||Red Beam|
|Laser Beam Type||Static Line|
|Levelling Axis||Horizontal & Vertical Levelling|
|Horizontal Lines||1 Horizontal Line|
|Vertical Lines||4 Vertical Lines (360°)|
|Additional Facilities||Plumb (Up), Plumb (Down), 4-way squaring, Floor squaring, Ceiling squaring, 360° Rotate base|
|Usage||Indoor & Outdoor|
|Battery||Alkaline Non-Rechargeable Batteries|
|Runtime||Up to 8 Hours (Approx)|
|Mounting Thread||⅝ Standard Surveying|
|Laser Output Rating||Class 2|
|IP Rating (Waterproofing)||IP43 - Protected from water spray less than 60 degrees from vertical|
|Warranty||Automatic 1 Year Warranty|
Kit comprises ofOrient LP618 Instrument (checked and pre-calibrated)
Orient LR-60 Line Laser Detector With Mounting Bracket & 9V Battery Orient RL600 Remote Control 4 x AA Alkaline Batteries (for LP618) 2 x AA Alkaline Batteries (for RL600) Red Laser Enhancement Glasses Red Target Plate Quick Start Guide Hard Carry Case With Foam Lining 1 Year Automatic Warranty
Checked, Calibrated & Prepared
Prior to dispatch, your new Laser Level Kit will be inspected and prepared by our technicians. During this time the kit will be checked and calibrated and all batteries fitted. We will also apply our "supplied by" labels to permit access to our Service Department in the future. Any accessories which require radio pairing (where applicable) will also be setup.
When the order is dispatched, a PDF (digital copy) of the VAT invoice will be attached to the dispatch confirmation email and a paper copy of the VAT invoice will be in the box for you to give to your accounts department.
Freephone Technical Support
Sometimes you just need a little help. "What does this button do?", "How do I set this?". If you have a question, our helpful and friendly technical team is at the end of the phone Monday - Friday: 9 am - 5 pm to answer your questions.
Exclusive access to our Repairs & Servicing Department
We only Repair, Calibrate & Service products originally purchased from us. If your laser is damaged, needs calibrating or requires some other work doing to it, we have expert technical staff available to assist you. Focusing only on our customers, means we have quick turn around times - getting you back up and running faster!
Collect in person from our Chesterfield, Derbyshire, UK Showroom
Monday - Friday - 9am - 4pm (Last visitor: 3:30pm)
We want you to be completely happy with your new purchase!
If within the first 30 days, you are not satisfied or have changed your mind with any purchase, we will give you a full refund when it is returned to us in an unusued condition, complete with all of the original packaging. We regret that refunds cannot be issued for equipment that shows any evidence of having been used and we are unable to refund the inbound delivery charge.