Fukuda FRD400R Rotary Detector
Have a question? Freephone: 08000 869 769
Product overview:
The FRD400R is a Professional Laser Detector which is accurate and designed to be site robust. It will operate with ALL BRANDS & models of visible red beam Rotary Laser levels spinning at 600+ rpm.
It is specifically compatible with the following Fukuda Red beam laser models: FRE-207, FRE-208, FRE-203XR, FRE-102AR and is designed to extend the range of these lasers to 500m diameter.
(Note: This Detector is NOT suitable for green beam Rotarys nor any Cross Line laser)
Features:
Large detecting range compatible with visible red output lasers
from 635 nm to 780 nm.
High accuracy.
Top mounted magnet.
Rubber protected body.
Audible and visual indication of set LEVEL.
Back-lit display.
Staff mounting clamp bracket.
Specification:
Detecting accuracy: fine & course settings +/- 1mm & +/- 2mm
Display: Front & back LCD, back-lit (blue tint)
Audible pitch warning. (selectable On/Off)
Power supply: 1 x 9V battery
Operating time: Approx 30 hours continuous, at 20 deg C.
Low battery warning via LCD
Power Conservation: 10 minutes auto cut-off.
Dimensions: 75 x 30 x 155mm
Weight: 450g (with battery & bracket)
Calibration and servicing:
If you routinely work on large job sites, which require you to have a physical Calibration certificate, issued in your name and matched to the Laser via its serial number, you must ensure you tick the above box marked "Paper Certificate" (where applicable) to add a Calibration certificate to your order. The Certificate will then be generated and included with your Laser. Please note the issuing of a Calibration certificate DOES NOT delay or hold up the despatch of your Laser in any way.
Kit comprises of:
Fukuda FRD400R Detector
Mounting bracket
9V Alkaline Battery
VAT Invoice:
When the order is dispatched, a PDF (digital copy) of the VAT invoice will be attached to the dispatch confirmation email and a paper copy of the VAT invoice will be in the box.Key information:
Model | FRD400R |
---|---|
Brand | Fukuda |
Type | Detector / Receiver |
Laser beam | Dot |
Laser colour | Red Beam |
Usage | Indoor & Outdoor (Although mainly an Outdoor product) |
IP rating | IP44 (Protected from water spray from any direction) |
Warranty | Automatic 1 Year Warranty |
You may also be interested in the following similar products:
![]() Spectra HL700 Detector
£229.00
Incl. VAT:
£274.80
|
![]() Spectra HL450 Detector |
![]() Spectra CR600 Magnetic Detector |
Questions and answers about this product:
Please click the relevant question to display the answer. Or you can ask your own question by clicking the "Ask a Question" button.
Question:
hi would this work with my dewalt dwo73 laser red beam
Answers:
-
Posted byon Thursday 31st of October 2019
Hi Mark,
The Fukuda FRD400R Rotary Detector will work with all visible red beam rotary lasers which spin at 600RPM.
Best regards
Mark Roberts
Laser Levels OnlineThe Laser Level Specialists
Question:
Is the fakuda FRD400R detector compatible with Pentax PLP50 rotary laser level
Answers:
-
Posted byon Tuesday 7th of May 2019
Hi Dennis,
Thank you for your message.
A more compatible option would be a model like the LS-8 shown here:
This will work with all red beam rotary lasers.
Best regards
Laser Levels Online.
Question:
Hi I purchased a Fakuda FRE-301 R laser level kit around 18 months ago which has been fine but want to upgrade the detector . Does the FRD 400R detector fit into the FRE -301 case ? Thanks Sean
Answers:
-
Posted byon Monday 10th of December 2018
Hello Sean
I have just checked for you and determined that the FRD400R will just fit into the foam insert in your FRE-301R case.
It is a tight fit and if possible, shaving a slight chamfer on the lid foam with a sharp Stanley knife does help.
Note: The detector can remain fitted to its bracket too.
Hope this information helps.
Best regards
Ian Roberts
Laser Levels Online.
Question:
Could you tell me if the Fukuda free-207 rotary detector is compatible with a stabila LAR 100
Answers:
-
Posted byon Thursday 20th of November 2014Hi Roger,
Thank you for your email.Yes, the FRE-207 Detector will work with your Stabila LAR150 because it is a red beam rotary that spins at around 600RPM.If you have any further questions or require any additional assistance please do not hesitate to contact us.
Best regards
Mark Roberts
Laser Levels Online