Fully Self Levelling Rotary Laser Level for Horizontal & Vertical Use

Spectra HV101 Base Unit

The Spectra Precision HV101 auto levels (self-levels) both horizontally & vertically. 
Automatic self-levelling increases productivity with fast setups. 
Single grade using the instruments keypad and Dual grade (slope) facility using the included RC601 Remote control. 
Beam is easily visible even in brightly lit conditions. 
Durable construction can withstand tough jobsite conditions. 
Split beam enables plumb point transfer and 90-degree layout 

The included RC601 Remote control offers scanning, speed control, slope setting, and alignment control for fast one person setups.

Please note this kit has alkaline batteries NOT rechargeables

If you require a Laser of the same type, but with Rechargeable batteries, please look at the Spectra HV302. 

 

Laser Source: <5 mW @ 635 nm, Class 3A.
Laser Accuracy: ±3 mm at 30 metres (±20 arc seconds).
Operating Range: 30m maximum visual or 300m diameter when used with a Detector (Which is not included as standard in this base unit)
Self-levelling Range: ±5 degrees. (It will level on a surface with up to 5 deg slope)
Compensation Method: Electronic self-levelling.
Power source: 2 x "D" Alkaline Batteries.
Battery life: 50 hours Alkaline or 45/25 hours with User provided 
Ni-MH/Ni-CD batteries.
Battery Status LED: Flashing red LED.
Rotation speed: Four preset speeds 0, 50, 200, 600 RPM.
Scan angles: Five preset angles 3°, 8°, 45°, 90°, 180°.
Out-of-level warning: Rotor stops, laser shuts off, red out-of-level LED flashes.
Operating temperature: -5 °C to 45 °C.
Storage temperature: -20 °C to 70 °C.
Water resistant: Yes - to protection standard IP54.
Size: 21.6L × 17.1W × 15.2H cm.
Instrument Weight: 1.5 kg.
Warranty: 2 Year

 

Accuracy:
+/- 3mm @ 30 metres, max. operating diameter 300m (150m either side of the instrument).
An accuracy of +/- 3mm @ 30 metres is equivalent to 0.1 mm/m and to put that into perspective, the best premium German spirit level has an accuracy of +/- 0.5 mm/m or +/- 15mm @ 30 metres.

Dual Grade facility:

Both X & Y axis can be set to give a maximum fall of at least 1m at 10m distance away. (ie. 1 in 10 & 10% grade)

nb. These grades can be set from the HV101's keypad or if the User wants to do this remotely (up to 20m away), then use the included RC601 remote control.

Applications - Indoors: 
General interior work 
Acoustical ceiling installation (included wall bracket clamps to trim angle) 
Drywall installation 
Squaring / layout 
Interior finishing work & Shop fitting etc 

Applications - Outdoors (Only when used in conjunction with a Detector which is not supplied as standard):
Residential construction 
Small & commercial construction 
Site levelling / foundations 
Squaring / layout 
Vertical alignment

Please click HERE to visit the manufactures data page.

SPECTRA PRECISION WARRANTY (From October 1, 2017) - 2 year "No Cost” warranty

The new worldwide warranty program—effective October 1, 2017—provides expanded “No Cost” warranty coverage for many products including the Spectra HV101.

Year 1 & Year 2: Free replacement instrument giving full cover against defects due to material & workmanship (parts & labour).

The new warranty policy cannot be applied retrospectively to products sold prior to October 1, 2017. The old policy will remain in effect for these products - see below.

SPECTRA PRECISION WARRANTY (Prior to October 1, 2017) - 3 year limited

The HV101 is backed by the industry's only 3-year instant over-the-counter Exchange Warranty.

Year 1: Free replacement instrument giving full cover against defects due to material & workmanship (parts & labour).

Year 2: Limited cover against defects due to material & workmanship. We will provide a replacement NEW instrument for a supplemental payment of £300 + vat.

Year 3: Limited cover against defects due to material & workmanship. We will provide a replacement NEW instrument for a supplemental payment of £300 + vat.

Optional accessories are also covered on a similar basis:

Remote Control RC601 - as above for Year 1 with a supplemental payment of £60 +vat for Years 2 & 3.

*Warranty period commences from the date of receipt of the equipment*

Kit includes the RC601 Remote control and batteries.

The RC601 allows the user to adjust the Speed of rotation & switch to Scan mode and adjust single &/or dual-axis slope control.

Please Note: 

This RC601 Remote Control is only suitable for use with Spectra laser levels. It CANNOT be used to turn the Laser ON or OFF (a feature not available on any Spectra laser level system.)

Upgrade the kit to include the Spectra HR320 Detector

 

A popular and very practical detector for exterior and interior
leveling and alignment applications.

 

Features:

Dual LCDís on front and rear are ideal for general exterior applications
Fine or standard accuracy fits all application needs.
Strong waterproof housing (IP67) protects the unit from dust, moisture and accidental drops
Loud 100 dBA speaker can be heard on the nosiest job site

Two On-Grade Sensitivities: Fine 2 mm, Coarse 6 mm
LCD Channels: 5
Battery Life: 70 hrs
Automatic Shutoff: 30 minutes
Dust & Waterproof: Yes to IP67
Weight: 0.33 kg
Warranty: 3 Years

 

HR320 Detector includes:

HR320 instrument
Alkaline batteries x 2
Mounting bracket
Instruction & safety manual
3 Year Warranty

Upgrade the kit to include the Spectra HL450 Detector

 

The Spectra Precision HL450 Detector is an easy-to-use tool that accurately measures elevations across the site, and is ideal for use with any rotating laser level.

The HL450 features a digital readout of elevation that provides a numeric display of ±40 mm to 1mm resolution. The readout is displayed on the large front and rear LCD's and shows exactly how far the elevation is from on-grade.

Accurate measurements can be made without moving the rod clamp, saving time and increasing productivity.

The HL450 has a 102 mm (4 inch) reception height, double the typical industry standard, which allows quick acquisition of the laser beam. Also included is a patented anti-strobe sensor that prevents construction lights from setting off the Detector and makes it easier to identify the laser beam signals.

The Detector is designed to survive the tough construction site conditions. It is totally waterproof (IP67) and can withstand a drop up to 1.5 meters (5 feet) onto concrete.

 

Features:

Digital Readout of Elevation allows faster readings by displaying the exact numerical distance from grade, eliminating the need to move the detector to get to "on-grade".
Anti-Strobe Sensor stops construction strobe lights from setting off the detector and eliminates phantom strikes for easier identification of true laser beam signals.
Large reception height allows faster readings by acquiring the beam quickly, and makes it easier to stay in the beam.
Durable in tough environments provides less downtime due to damage or service requirements after accidental drops.

 

HL450 Detector uincludes:

HL450 instrument
Alkaline batteries x 2
Mounting bracket
Instruction & safety manual
3 Year Warranty

We check and calibrate all Lasers prior to dispatch, to ensure they meet or exceed the manufacturers published specifications at the time of shipment from the factory.
If you routinely work on large job sites, which require you to have a physical Calibration certificate, issued in your name and matched to the Laser via its serial number, you must ensure you tick the above box marked "Paper Certificate" (where applicable) to add a Calibration certificate to your order. The Certificate will then be generated and included with your Laser. Please note the issuing of a Calibration certificate DOES NOT delay or hold up the despatch of your Laser in any way.

HV101 Rotary Laser Level (checked and pre-calibrated)
RC601 Remote Control
2 x type 'D' Duracell alkaline batteries
Adjustable wall mount M101
Red Magnetic Target 1176
Red Laser Enhancement Glasses
Laser site sign
Safety & User Instruction Guide
Robust carry case
2 Year Warranty